APS TE M4 Carbine SDU Gelsoft Blaster

Let us introduce you to our exclusive PLATINUM range of Gel Blasters.

This model is the TE M4 Carbine featuring the eSilver Edge Alloy Gearbox, CNC Alloy Receiver and Handguard, Rear Iron Sight and Triangle Sight at the front. This blaster is Hitting over 280+ FPS!

DISCLAIMER
Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery. 

Features

eSilver Edge Gearbox

Quick Change Spring System
The Quick Change Spring Guide has 4 locking legs instead of 2.
Polished and Buffed housing surface.
8mm Bushings, Bearing Piston Head and Bearing Spring Guide.
SUD 2.0 Installed

Specs

• Gel Type: 7-8mm
• Inner barrel size: 7.5mm
• Barrel Type: Polished Stainless Steel
• Battery Source: 7.4 Li Po Battery with Mini Tamiya
• Alloy eSilver Edge Gear Box Installed
• 8mm Metal Bushings
• M100 Spring
• 480 Long Shaft Motor
• Velocity: 280+FPS
• Fire Selector: Safe / Semi Auto / Full Auto
• Metal Hand Guard and ABS Gen 8 Magazine 
• Metal Gear Box, Receiver, Sliding Stock, Handguard, Outer Barrel.
• Pistol Grip is made of a reinforced polymer. 
• Magazine Capacity: 250 Gels
• Suitable Hopup: DK-Gen 10 Reverse Thread Hopup 

ESILVEREDGE GEARBOX SDU INSTRUCTIONS/SPEC

SDU2.0 is a programmable ECU chips that is being used in eSilver Edge Gear Box

Simply pressing down the button underneath of the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needs, it is easy to program anytime and anywhere by the user.

First, connect your AEG with a fully charged battery (7.4V) Battery. The usuaal battery that you used when your play.

Second, find the switch button. The button is located underneath of the gear box reachable from the magwell of the lower receiver.

How to change the mode?

Step 1) Press and hold the button. You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

Choice of Firing Mode:

**Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **

Use of Advanced S.D.U.™ chips

The S.D.U.™ chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.

Micro Switch Trigger

eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.™,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand press. With the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.

In the Box

• 1 x TE M4 Carbine SDU 2.0
• 1 x Gen 8 Magazine - Black
• 1 x 10k Tactical Edge Hardened Milky White Gel Balls
• 1 x Plastic 14mm Left Handed Thread Orange Flash Hider
• 1 x Alloy 14mm Left Handed Thread Flash Hider - Black
• 1 x Safety Glasses

** Battery and Charger not included

Always use the appropriate eye wear and take all reasonable safety precautions when using our products.

Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in warm water from the tap for a minimum of 4-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain off any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

DISCLAIMER

Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery.