Gel Blaster APS TE SPYDER SDU

Let us introduce you to our exclusive PLATINUM range of Gel Blasters.

Introducing the TE Spyder. The TE Spyder features a eSilver Edge gearbox, full metal construction (including receiver), Flipped Rhino Sights & 270+ FPS on 7.4v battery.

The APS TE Spyder is a choice for any gelsoft player, looking for an assault weapon, for games in all types of environment, this standard of weapons comes comes fully equipped with an evolution of technology in internal systems, in addition, the external ones.

The system is intended to be used for the direct connection method for weapon accessories such as flash light mounts, laser modules, viewpoints, scope mounts, vertical handles, rail panels, hand stops, barrier brackets and many others, which are also used in gelsoft games.

eSilver Edge Gearbox

Quick Change Spring System
The Quick Change Spring Guide has 4 locking legs instead of 2.
Polished and Buffed housing surface.
8mm Bearing Bushings, Bearing Piston Head and Bearing Spring Guide.
SDU 2.0 Included

**Orange tip shown for illustration purposes**

Specs

• Gel Type: 7-8mm
• Inner barrel size: 7.5mm
• Barrel Type: Polished Stainless Steel
• Battery Source: 7.4 Li Po Battery with Mini Tamiya
• Alloy eSilver Edge Gearbox Installed
• 8mm Metal Bushings
• M100 Spring
• 480 Long Shaft Motor
• Velocity: 270+FPS
• Fire Selector: Safe / Semi Auto / Full Auto
• Metal Hand Guard and ABS Gen 8 Magazine 
• Metal Gear Box, Receiver, Handguard, Outer Barrel.
• Pistol Grip is made of a reinforced polymer. 
• Magazine Capacity: 250 Gels
• Suitable Hopup: DK-Gen 10 Reverse Thread Hopup 
• Recommended Gels - Gelsoft Ultra Hard

ESILVEREDGE GEARBOX SDU INSTRUCTIONS/SPEC

SDU2.0 is a programmable ECU chips that is being used in eSilver Edge Gearbox

Simply pressing down the button underneath the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needed, it is easy to program anytime and anywhere by the user.

First, connect your AEG with a fully charged battery (7.4V) Battery. The usual battery that you used when you play your Gelsoft game.

Second, find the switch button. The button is located underneath the gearbox reachable from the magwell of the lower receiver.

How to change the mode?

Step 1) Press and hold the button. You will see a Red LED light on, hold till you see it blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

Choice of Firing Mode:

**Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **

Use of Advanced S.D.U.™ chips

The S.D.U.™ chipset that is used in the eSilver Edge Gear Box has a unique function that stops the gearbox from further damage if the electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detects more than 5 trigger presses in exceeded Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended the user to check the internals immediately if a mal-function happens.

Micro Switch Trigger

The eSilver Edge Gear Box standard comes with a micro switch trigger which works together with the S.D.U.™,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand presses. With the short stroke design of the trigger, it is unbelievably fast and you won’t feel any trigger delay when shooting.

In the Box

• 1 x TE Spyder Gel Blaster
• 1 x Gen 8 Magazine - Black
• 1 x Plastic 14mm Left Handed Thread Orange Flash Hider
• 1 x Alloy 14mm Left Handed Thread Flash Hider - Black
• 1 x Safety Glasses

** Battery and Charger not included

Charging Batteries

Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

When charging the batteries, we recommend charging them between 1-4 hours.
When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

 Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in water from the tap for a minimum of 5-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain of any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend if you do this to change the water every couple of weeks.

DISCLAIMER
Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery.